StickIt Pro – Ultimate Epoxy Tile Injection Kit

Say goodbye to costly and messy tile replacements. The StickIt Pro Epoxy Tile Injection Repair Kit from Shalex lets you re-glue loose or drummy tiles in place—no need to remove or replace them. Ideal for professionals and DIYers alike, it’s surprisingly easy to use—with just a drill and this kit, you can reclaim secure tile surfaces in no time. 

What's Included In The Box

• An epoxy adhesive kit supplied in convenient twin-pouch packs (1 L or 5 L options)
• Injection pump bottle
• Accessories pack: drill bits, injection needles, and rubber plugs
• Step-by-step instruction manual

Why Choose StickIt Pro?

• Super-strong epoxy formula cures at any depth and fills large gaps
• Bonds to difficult surfaces—porcelain, natural stone, even tile over tile
• Works on damp surfaces (though not where water pools)
• Clear, flexible bond that withstands moisture and temperature swings
• Minimal mess—water cleanup and dry-shake packaging make the job easy

Application

Stickit Pro has a pot life of 2+ hours once mixed and typically cures within 24 hours with maximum bond strength achieved after 7 days.

Coverage

Floor Tiles: Approx. 5m² / kg
Wall Tiles: Approx. 10m² / kg

Activation Tile

Dry: 24 hours
Fully Cured: 72 hours

Pot life and curing times will be shorter at temperatures above 25°C.

Shelf Life

24 Months
Store below 35°C

Application Temperature

Surface Temp. 10°C – 40°C

Do not use when surface temperatures fall below 5°C as curing will stop.

Clean Up

Water

Perfect For:

• Fixing “hollow” or loose floor and wall tiles
• Rebonding cement render, laminate, carpet, or timber flooring
• Tackling stubborn installations: stone, porcelain, or tile-over-tile scenarios

Application Guide

Safety data sheet